Xerox 8560MFPD - Phaser Multifunction Printer Color Laser 보충 설명서 - 페이지 5

{카테고리_이름} Xerox 8560MFPD - Phaser Multifunction Printer Color Laser에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 8560MFPD - Phaser Multifunction Printer Color Laser 26 페이지. Letter-size color multifunction printer
Xerox 8560MFPD - Phaser Multifunction Printer Color Laser에 대해서도 마찬가지입니다: 보충 설명서 (7 페이지), 보충 설명서 (10 페이지), 빠른 사용 설명서 (5 페이지), 변동성의 편지 (1 페이지), 설치 매뉴얼 (2 페이지), 지침서 (2 페이지), 평가자 매뉴얼 (20 페이지)

페이지 인쇄
Xerox 8560MFPD - Phaser Multifunction Printer Color Laser 보충 설명서
2. Close the document feeder.
3. On the control panel, select
calibration page.
4. Wait for the scan to be completed, and then select one of the following options:
■
If the control panel indicates
■
If the control panel indicates
5. Remove the Scanner Calibration page from the document glass.
■
If you have a document feeder, continue with the steps in the Document Feeder section.
■
If you have a document glass cover, you have completed scanner calibration.
Document Feeder
1. Place the Scanner Calibration page in the document feeder, so that the top edge of the page enters the
feeder first. Adjust the paper guides to fit against the page.
Note: Make sure the Scanner Calibration page is aligned correctly and the paper guides are adjusted to
fit against the paper. If the page is misaligned, the calibration procedure will fail.
2. On the control panel, select
calibration page.
3. Wait for the scan to be completed, and then select one of the following options:
■
If the control panel indicates
complete.
■
If the control panel indicates
Note: For more information about calibrating the scanner, see the Knowledge Base at
www.xerox.com/office/8510_8560support.
Copyright © 2006, by Xerox Corporaton. All Rights Reserved.
, and then press the OK button to scan the
Document Glass Step
, press the OK button, and then continue with Step 5.
Success
, press the OK button, and then repeat Steps 1–4.
Failure
Document Feeder Step
, press the OK button. The calibration procedure is
Success
, press the OK button, and then repeat Steps 1–3.
Failure
, and then press the OK button to scan the
www.xerox.com/office/8510_8560support
2 of 2
LTR/LGL
075-1018-00 Rev A