Xerox 8560MFPD - Phaser Multifunction Printer Color Laser Podręcznik uzupełniający - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik uzupełniający dla Wszystko w jednej drukarce Xerox 8560MFPD - Phaser Multifunction Printer Color Laser. Xerox 8560MFPD - Phaser Multifunction Printer Color Laser 26 stron. Letter-size color multifunction printer
Również dla Xerox 8560MFPD - Phaser Multifunction Printer Color Laser: Podręcznik uzupełniający (7 strony), Podręcznik uzupełniający (10 strony), Skrócona instrukcja obsługi (5 strony), List o zmienności (1 strony), Instrukcja instalacji (2 strony), Arkusz instrukcji (2 strony), Podręcznik oceniającego (20 strony)

2. Close the document feeder.

3. On the control panel, select

calibration page.

4. Wait for the scan to be completed, and then select one of the following options:

■

If the control panel indicates

■

If the control panel indicates

5. Remove the Scanner Calibration page from the document glass.

■

If you have a document feeder, continue with the steps in the Document Feeder section.

■

If you have a document glass cover, you have completed scanner calibration.

Document Feeder

1. Place the Scanner Calibration page in the document feeder, so that the top edge of the page enters the

feeder first. Adjust the paper guides to fit against the page.

Note: Make sure the Scanner Calibration page is aligned correctly and the paper guides are adjusted to

fit against the paper. If the page is misaligned, the calibration procedure will fail.

2. On the control panel, select

calibration page.

3. Wait for the scan to be completed, and then select one of the following options:

■

If the control panel indicates

complete.

■

If the control panel indicates

Note: For more information about calibrating the scanner, see the Knowledge Base at

www.xerox.com/office/8510_8560support.

, and then press the OK button to scan the

Document Glass Step

, press the OK button, and then continue with Step 5.

Success

, press the OK button, and then repeat Steps 1–4.

Failure

Document Feeder Step

, press the OK button. The calibration procedure is

Success

, press the OK button, and then repeat Steps 1–3.

Failure

, and then press the OK button to scan the

www.xerox.com/office/8510_8560support

2 of 2

LTR/LGL

075-1018-00 Rev A