Xerox ColorQube 9303 관리 및 회계 - 페이지 30

{카테고리_이름} Xerox ColorQube 9303에 대한 관리 및 회계을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox ColorQube 9303 38 페이지. Multifunction printer
Xerox ColorQube 9303에 대해서도 마찬가지입니다: 사양 (8 페이지), 사양 (12 페이지), 빠른 매뉴얼 (12 페이지), 사양 (11 페이지), 사용자 설명서 (14 페이지), 설치 및 운영 매뉴얼 (14 페이지), 사용자 설명서 부록 (11 페이지), 평가자 매뉴얼 (24 페이지)

페이지 인쇄

Network Settings

These settings are used to enter the

network parameters for the system. This

section provides an overview of the

options available.

Detailed instructions for network

installation are provided in the

Administrator

Guide.

Online/Offline

Use to disconnect the device from the

network temporarily. Selecting Offline disconnects the device from all networks. Any job entering the

system is held. Any current outgoing jobs are not completed while the system is offline.

Select Online to reconnect the device to the network.

TCP/IP Settings

This option enables the System Administrator to enter the TCP/IP settings for the device.

Advanced Settings

This option enables the System Administrator to setup the Network Settings. A warning screen is

displayed prior to accessing these settings as a Network Controller reset is required after the settings

are changed. These settings must only be accessed and entered or changed by the System

Administrator.

Network Logs

Only use this option if instructed to do so by the Xerox Support Center. It is used to download log

information which can help to troubleshoot network related problems.

USB Settings

This option is used to setup the USB port located at the rear of the device. This port is used for software

tools and for direct printing via a printer driver. It cannot be used for direct printing via a USB Flash

Drive, the USB port located on the left side of the device supports this function.

296

ColorQube™ 9301/9302/9303

Administration and Accounting

System