Xerox ColorQube 9303 Administration And Accounting - Page 30

Browse online or download pdf Administration And Accounting for All in One Printer Xerox ColorQube 9303. Xerox ColorQube 9303 38 pages. Multifunction printer
Also for Xerox ColorQube 9303: Specifications (8 pages), Specifications (12 pages), Quick Manual (12 pages), Specifications (11 pages), User Manual (14 pages), Installation And Operation Manual (14 pages), User Manual Supplement (11 pages), Evaluator Manual (24 pages)

Print Page

Network Settings

These settings are used to enter the

network parameters for the system. This

section provides an overview of the

options available.

Detailed instructions for network

installation are provided in the

Administrator

Guide.

Use to disconnect the device from the

network temporarily. Selecting Offline disconnects the device from all networks. Any job entering the

system is held. Any current outgoing jobs are not completed while the system is offline.

Select Online to reconnect the device to the network.

This option enables the System Administrator to enter the TCP/IP settings for the device.

This option enables the System Administrator to setup the Network Settings. A warning screen is

displayed prior to accessing these settings as a Network Controller reset is required after the settings

are changed. These settings must only be accessed and entered or changed by the System

Administrator.

Only use this option if instructed to do so by the Xerox Support Center. It is used to download log

information which can help to troubleshoot network related problems.

This option is used to setup the USB port located at the rear of the device. This port is used for software

tools and for direct printing via a printer driver. It cannot be used for direct printing via a USB Flash

Drive, the USB port located on the left side of the device supports this function.

296

ColorQube™ 9301/9302/9303

Administration and Accounting

System