Calex ExTemp Series 운영자 매뉴얼 - 페이지 6
{카테고리_이름} Calex ExTemp Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Calex ExTemp Series 17 페이지. Intrinsically safe infrared temperature sensor and lct loop configuration tool
페이지 인쇄ACCESSORIES
A range of accessories to suit different applications and industrial environments is available as
follows. These may be ordered at any time and added on-site:
•
LCT Loop Configuration Tool (USB adapter)
•
Fixed and adjustable mounting brackets
•
Air purge collar
OPTIONS
The following options are available. Options are factory installed and must be ordered with
the sensor.
•
Certificate of calibration
•
Extended cable (25 m max. factory-fitted; contct Calex for information about
extending the cable)
OPTICS
The below chart shows the measured spot diameter at the given distances from the sensing
head and assumes 90% energy. The sensor may be used at longer distances than shown
below, with a larger measured spot size.
Distance: Sensor to object (inches)
0
0.5
11.0
0
Distance: Sensor to object (mm)
Distance: Sensor to object (inches)
0
0.5
11.0
0
Distance: Sensor to object (mm)
INSTALLATION AND MAINTENANCE
The installation process consists of the following stages:
1
Preparation
2
Mechanical installation
3
Electrical installation
Please read the following sections thoroughly before proceeding with the installation.
6
4
8
4.4
2.4
D:S 2:1
61.9
111.9
100
200
-21
19.7
39.4
1.8
1.1
D:S 30:1
28.6
45.2
500
1000
-301
Distance: Sensor to object (inches)
0
19.7
1.8
0.5
D:S 15:1
11.0
45.2
0
500
Distance: Sensor to object (mm)
-151
Distance: Sensor to object (inches)
0
3.9
0.5
0.20
11.0
5.0
0
100
Distance: Sensor to object (mm)
-CF
39.4
3.1
78.6
1000
7.9
0.49
12.5
200