Xerox 4595 고객 기대치 문서 - 페이지 19

{카테고리_이름} Xerox 4595에 대한 고객 기대치 문서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4595 33 페이지. Copier/ printer with copy-server and controller
Xerox 4595에 대해서도 마찬가지입니다: 운영자를 위한 매뉴얼 (1 페이지), 소개 (4 페이지), 빠른 참조 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (4 페이지), 브로셔 및 사양 (4 페이지)

페이지 인쇄

Space requirements

Optional Finisher/Folder and HCF

The following illustration shows the space requirements and service space envelope with the

optional Finisher/Folder and HCF installed. For other configurations, consult the Module

Dimensions chart.

The illustration below shows the space requirements and service space envelope for the printer

system with the Finisher/Folder and HCF installed. If there is no HCF attached, then the Multi-

Sheet Inserter, in the closed position (3.3 in/83 mm), needs to be figured in.

The optional FreeFlow DocuSP Print Server Stand is not shown.

NOTE 1: The dimensions shown are absolute minimums.

NOTE 2: There should be a 78 in. (1981 mm) minimum height clearance in service envelope.

NOTE 3: Location of left rear corner of main processor should be marked with tape for delivery

personnel.

NOTE 4: If there is no HCF attached, then the Multi-Sheet Inserter, in the closed position (3.3"/83

mm), must be calculated in the space requirements.

Optional Finisher/Folder, FFPS, and HCF

The following illustration shows the space requirements and service space envelope with the

optional Finisher/Folder, optional FreeFlow Print Server, and optional HCF installed. For other

configurations, consult the Module Dimensions chart.

NOTE 1: The dimensions shown are absolute minimums.

NOTE 2: 78" (1981 mm) minimum height clearance in service envelope.

NOTE 3: Location of left rear corner of main processor should be marked with tape for delivery

personnel. (See diagram above)

NOTE 4: If there is no HCF or OHCF attached, then the Multi-Sheet Inserter, in the closed

position (3.3"/83 mm), must be calculated in the space requirements.