Xerox XC356 - Home Office Copier 사용자 설명서 - 페이지 23

{카테고리_이름} Xerox XC356 - Home Office Copier에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox XC356 - Home Office Copier 50 페이지. User guide
Xerox XC356 - Home Office Copier에 대해서도 마찬가지입니다: 사용자 설명서 (39 페이지)

페이지 인쇄

Xerox XC356 - Home Office Copier 사용자 설명서

Setting Copy Exposure Range

The copy exposure range may be adjusted when the copy image is

consistently too dark or too light. The Exposure button and the indicators

on the control panel are used to enter and select the long term copy

density changes. The new copy exposure range will remain set untilthis .

process is used again.

R*-ol

@B-ol

FB*-d

Note: In the following procedure, it is impoftant to complete step 2

immediately after completing step 1, as the copier will time out in

approximately 10 seconds and return to the ready mode.

Select the Light mode when the majority of the

originals have a dark background or are photographs.

Select the Auto mode for normal everyday copying

(many different kinds of originals).

Select the Dark mode when the majority of originals

have light printed areas, such as pencil lines.

1. Press and hold the Exposure button

until the indicator for the current

exposure setting starts to flash

(approximately 1 0 seconds).

2. Press and release the Exoosure button

until the flashing light is under the

indicator for the appropriate exposure

range.

. lf power is interrupted while setting

copy exposures, no change will be

made to the current exposures range.

Approximately 5 seconds after selecting the appropriate indicator the

exposure indicator will go out, the auto and ready indicators will light, and

the new copy exposure range will be set.

XC355 and XC356 Copiers only

Note: Pressing the Clear button will have no effect during this procedure.

1 8