Xerox XC356 - Home Office Copier Gebruikershandleiding - Pagina 23
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox XC356 - Home Office Copier. Xerox XC356 - Home Office Copier 50 pagina's. User guide
Ook voor Xerox XC356 - Home Office Copier: Gebruikershandleiding (39 pagina's)
Pagina afdrukken
Setting Copy Exposure Range
The copy exposure range may be adjusted when the copy image is
consistently too dark or too light. The Exposure button and the indicators
on the control panel are used to enter and select the long term copy
density changes. The new copy exposure range will remain set untilthis .
process is used again.
R*-ol
@B-ol
FB*-d
Note: In the following procedure, it is impoftant to complete step 2
immediately after completing step 1, as the copier will time out in
approximately 10 seconds and return to the ready mode.
Select the Light mode when the majority of the
originals have a dark background or are photographs.
Select the Auto mode for normal everyday copying
(many different kinds of originals).
Select the Dark mode when the majority of originals
have light printed areas, such as pencil lines.
1. Press and hold the Exposure button
until the indicator for the current
exposure setting starts to flash
(approximately 1 0 seconds).
2. Press and release the Exoosure button
until the flashing light is under the
indicator for the appropriate exposure
range.
. lf power is interrupted while setting
copy exposures, no change will be
made to the current exposures range.
Approximately 5 seconds after selecting the appropriate indicator the
exposure indicator will go out, the auto and ready indicators will light, and
the new copy exposure range will be set.
XC355 and XC356 Copiers only
Note: Pressing the Clear button will have no effect during this procedure.
o
t
1 8