Xerox PHASER 5400 매뉴얼 - 페이지 6
{카테고리_이름} Xerox PHASER 5400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox PHASER 5400 11 페이지. 1000-sheet stacker
Xerox PHASER 5400에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (40 페이지), 기술 지침 (5 페이지), 설치 지침 (2 페이지), 종이 매뉴얼 (2 페이지)
페이지 인쇄
10. Clean the PCR contacts with a cotton swab and alcohol.
12. Install the drum, axle pins, and screws. Make sure that the metal axle pin is on the double gear side, and the white plastic
pin is on the single gear side. Although the toner hopper can be cleaned and filled through the fill plug, it is recommended that
the magnetic roller be removed and cleaned. This will also be necessary to do once a seal is available. The fill plug has a black
cover in the center that is held on by double sided tape. This cover is actually the chip, which must be replaced for the cartridge
to work.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
11. Clean the PCR with your preferred PCR cleaner and install
in the holders.
www.uninetimaging.com