Xerox PHASER 5400 매뉴얼 - 페이지 7

{카테고리_이름} Xerox PHASER 5400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox PHASER 5400 11 페이지. 1000-sheet stacker
Xerox PHASER 5400에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (40 페이지), 기술 지침 (5 페이지), 설치 지침 (2 페이지), 종이 매뉴얼 (2 페이지)

Xerox PHASER 5400 매뉴얼
13. With a small jeweler's screwdriver, pry the black cover off
the fill plug.
15. On the side opposite the fill plug, remove the two screws
and end cap.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
14. With the pair of needle nose pliers, pull the fill plug out.
Grasp the plug by the small cross braces, and pull. This
method does not damage the plug seal. Dump out any remain-
ing toner from the hopper.
16. Press in and lift up the locking tab on the right side of the
magnetic roller. With the keyed shaft of the magnetic roller
free, lift up on the keyed end by the locking tab. Pull the entire
magnetic roller assembly free.
www.uninetimaging.com