Xerox Phaser 6180 시작하기 - 페이지 13

{카테고리_이름} Xerox Phaser 6180에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 6180 28 페이지. Color laser printer
Xerox Phaser 6180에 대해서도 마찬가지입니다: 사용자 설명서 (1 페이지), 보충 설명서 (3 페이지), 빠른 사용 설명서 (5 페이지), 설치 매뉴얼 (1 페이지), 보충 설명서 (1 페이지), 지침서 (2 페이지), 지침서 (2 페이지), 지침서 (2 페이지), 지침서 (2 페이지), 지침서 (1 페이지), 지침서 (1 페이지), 지침서 (1 페이지), 지침서 (1 페이지), 평가자 매뉴얼 (16 페이지), 사양 (4 페이지), 서비스 매뉴얼 (17 페이지), 설치 매뉴얼 (2 페이지), 빠른 사용 설명서 (6 페이지), (포르투갈어) 빠른 시작 가이드 (5 페이지)

페이지 인쇄

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING STARTED

Caveat

During a Print Now or Proof, a message to

"Remove Sheets from the Top Tray" may be

displayed when there is no need to remove

sheets. Always clear the message before

performing any other operation.

When a job is printing to the top tray and is

interrupted by a print now or proof job, the

interrupted job stops (as it should) and an

error message reads "remove sheets from top

tray". Whether the sheets are removed or not,

the message stays until "reset" is selected in

the fault frame.

The listp command does not work on the 61xx

system.

If the system is in power saver mode and all of

the paper trays are empty, when the power

saver mode is reset, the printer may hang with

the printer initializing until paper is added to

the trays.

External finishing cannot be selected at the

client using the IPP or HTTP gateways.

Submit the job to the printer without any

finishing, and select the external finisher at the

DocuSP.

Do not apply late binding attributes (Apply

Properties Now) and Reposition Output

options on the same job.

Intervening DJDE packets cause the EPS and

LPS to process GRAPHIC DJDEs differently.

LPS prints the data on the same page. EPS

prints the data on two or more pages.

For multi-copy jobs, if an OTEXT command is

specified on a copy pass for a page that

doesn't print (no data on the page), then the

OTEXT message will not be displayed and the

WAIT parameter will be ignored.

The system is unable to resume printing when

late binding attributes and page spacing

options are used. As a work around, restart

the DocuSP or Select Sample Current job

from the Printer drop down menu to activate

the resume and sample button on the

repositioning output dialog box and the

Resume button on the DocuSP main window.

DOCUSP 3.6.xx

Applicable printer product

DocuTech 61xx

DocuPrint 1xx EPS

DocuTech 61xx

DocuPrint 1xx EPS

2-3