Xerox Phaser 750DP 서비스 매뉴얼 - 페이지 23
{카테고리_이름} Xerox Phaser 750DP에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 750DP 40 페이지. Digital color printer / copier
Xerox Phaser 750DP에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 및 사양 (4 페이지), 참조 매뉴얼 (8 페이지), 매뉴얼 (9 페이지)
페이지 인쇄
Status
Code
08-165
The control logic sensed a timing problem from the TC (Transfer Corotron) Jam Sensor.
Initial action:
Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.
Clean the TC (Transfer Corotron) Jam Sensor.
Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth
(water) (REP 5.22) (REP 5.24).
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
Check that there is no paper tacked to the Drum.
If the problem still exists:
Place a service call.
08-167
The control logic sensed a timing problem from the Misstrip Sensor On Check.
Initial action:
Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.
Clean the TC (Transfer Corotron) Jam Sensor.
Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth
(water) (REP 5.22) (REP 5.24).
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
Check for excessive wear, damage or proper installation of the Stripper Finger.
Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17).
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-23
Fault Code Procedures