Xerox Phaser 750DP Instrukcja serwisowa - Strona 23

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Akcesoria do drukarek Xerox Phaser 750DP. Xerox Phaser 750DP 40 stron. Digital color printer / copier
Również dla Xerox Phaser 750DP: Specyfikacje (2 strony), Broszura i specyfikacje (4 strony), Podręcznik referencyjny (8 strony), Podręcznik (9 strony)

Drukuj stronę
Xerox Phaser 750DP Instrukcja serwisowa
Status
Code
08-165
The control logic sensed a timing problem from the TC (Transfer Corotron) Jam Sensor.
Initial action:
Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.
Clean the TC (Transfer Corotron) Jam Sensor.
Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth
(water) (REP 5.22) (REP 5.24).
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
Check that there is no paper tacked to the Drum.
If the problem still exists:
Place a service call.
08-167
The control logic sensed a timing problem from the Misstrip Sensor On Check.
Initial action:
Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.
Clean the TC (Transfer Corotron) Jam Sensor.
Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth
(water) (REP 5.22) (REP 5.24).
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
Check for excessive wear, damage or proper installation of the Stripper Finger.
Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17).
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-23
Fault Code Procedures