Xerox Phaser 7750 설치 매뉴얼 - 페이지 3

{카테고리_이름} Xerox Phaser 7750에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7750 6 페이지. Color laser printer
Xerox Phaser 7750에 대해서도 마찬가지입니다: 사양 (4 페이지), 사용자 설명서 (35 페이지), 브로셔 (8 페이지), 소유자 매뉴얼 (4 페이지), 사양 (2 페이지), 네트워크 매뉴얼 (8 페이지), 빠른 설정 (5 페이지), 보충 설명서 (5 페이지), 매뉴얼 (5 페이지), 보충 설명서 (2 페이지), 보충 설명서 (16 페이지), 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (3 페이지), 유지 관리 매뉴얼 (1 페이지), 컬러 매뉴얼 (4 페이지), 설치 매뉴얼 (33 페이지), 빠른 참조 매뉴얼 (8 페이지), 서비스 매뉴얼 (14 페이지), 빠른 참조 매뉴얼 (8 페이지), 빠른 참조 매뉴얼 (8 페이지), 설정 매뉴얼 (2 페이지), 사용자 문서 (17 페이지), 설정 매뉴얼 (2 페이지), 메모리 추가 매뉴얼 (2 페이지)

Creating an AppSocket Printer with LaserWriter 8.6

Xerox provides Macintosh AppSocket printing with PhaserPort for Mac OS on the printer's

Printer Installer and Utilities CD-ROM. PhaserPort for Mac OS provides a bi-directional,

high-speed communications channel using the new plug-in communication architecture of

Apple LaserWriter version 8.6.

AppSocket provides feedback about print job status which is not available through LPR.

PhaserPort for Mac OS System Requirements

Note

PhaserPort is not supported under Mac OS X.

System requirements include:

■

A Phaser printer installed on a TCP/IP network

■

PowerPC-based Macintosh

■

Apple's LaserWriter version 8.6 or later, with Desktop Printing enabled

■

Open Transport version 1.1 or later networking. TCP/IP networking provided by MacTCP

software is not supported. The Macintosh must be properly configured to communicate

with the printer.

Creating a Desktop Printer with PhaserPort for Mac OS

Launch the PhaserPort Printer Tool.

Enter the printer's IP address or DNS name in the Printer Internet Address field.

Enter a name for the desktop printer in the Desktop Printer Name field.

Click Verify to contact the printer over the TCP/IP network, then verify its network

configuration.

Click Create to create the desktop printer.

Click Quit to exit the PhaserPort Printer Tool.

In the Finder, click the newly created desktop printer icon.

Click Change Setup in the Finder's Printing menu.

Select the PostScript Printer Description file and provide configuration information.

You can also select the Auto Setup button, then Macintosh automatically attempts to

determine the correct settings for the Phaser printer.

Note

Certain utilities, such as Adobe Font Downloader, are not compatible with PhaserPort for

Mac OS software because they attempt to directly communicate with the printer using the

AppleTalk protocol. If you use Mac OS software, create an AppleTalk desktop printer,

then delete this printer after running and exiting the non-compatible software.

Phaser® 7750 Color Laser Printer

3-34

Macintosh