Xerox Secure Access Unified ID System 설치 매뉴얼 - 페이지 25

{카테고리_이름} Xerox Secure Access Unified ID System에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Secure Access Unified ID System 36 페이지.

Upgrading Secure Access

Whether performing a phased upgrade, or upgrading all components during a period of scheduled

downtime, the instructions below step you through the Installation wizard for upgrading Secure Access.

Note:

It is recommended that you back up your database prior to performing an upgrade.

During the Secure Access upgrade, the installation wizard detects the Secure Access components

already installed on the machine (e.g. the database). These components will be automatically selected

in the installation wizard. You can leave the default selections, or you can select additional components

to install.

To upgrade Secure Access, do the following:

1. Close all other applications on the server machine prior to running the Secure Access installation.

2. Launch the Secure Access installation wizard.

• If you are installing from the Secure Access CD, select the 32-bit Setup.exe to begin the install

for a 32-bit machine, or select the 64-bit Setup.exe to begin the install for a 64-bit machine.

• If you are installing from an electronic distribution, download the ZIP file and run the 32-bit or

64 -bit server Setup.exe file.

Note:

If you attempt to run the setup.exe file and receive an error message, you may need to

update the version of the Microsoft Installer. Visit the Microsoft website and download and install

the latest Microsoft installer for your operating system.

3. At the Welcome screen, click Next to begin the installation process.

4. Review the Software License agreement, and click I accept, then click Next.

5. Choose the options you want to install on this machine, then click Next.

By default, all components are selected. Select only those components that you need on this

particular server machine. For example, if this machine is your Print Server, install only the DRE and

DCE components. Run the Installer on another server machine to install the remainder of the

components as needed.

6. Enter the name of the Xerox Secure Access Authentication Server.

7. Click Finish to exit the installation wizard.

The Secure Access server upgrade is now complete. Refer to Chapter 5 to set up the Secure Access

hardware.

Installing the Secure Access Server

Xerox Secure Access Installation Guide