Xerox VersaLink B7030 보안 기능 추가 설명서 - 페이지 23
{카테고리_이름} Xerox VersaLink B7030에 대한 보안 기능 추가 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox VersaLink B7030 50 페이지. Drum cartridge
Xerox VersaLink B7030에 대해서도 마찬가지입니다: 빠른 사용 설명서 (20 페이지), 매뉴얼 (6 페이지), 유지 관리 (5 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 사용 설명서 (20 페이지), 빠른 사용 설명서 (20 페이지)
페이지 인쇄
Set IPSec
Before setting Digital Signature for IKE Authentication Method , you need to import an IPSec
certificate according to the same procedure as "Import Machine Certificates".
1.
Select Connectivity .
2.
Select IPSec .
3.
Enable IPSec
4.
Select Preshared Key or Digital Signature for IKE Authentication Method.
5.
When you select Preshared Key , enter a preshared key of 9 or more characters in Preshared Key and
Retype Preshared Key .
When you select Digital Signature , select the certificate name in Device Certificate .
6.
Enter the IP Address in Specify Destination IPv4 Address.
7.
Enter the IP Address in Specify Destination Ipv6 Address.
8.
Select Enabled or Disabled for Communicate with Non-IPSec Device.
9.
Select OK .
10. Select Restart Now if prompted.
Set Overwrite Hard Disk
Follow the procedure below to configure the Data Overwrite settings.
This feature is only applicable to HDD Model.
1.
Select System .
2.
Select Security .
3.
Select Edit for Disk Overwrite.
4.
Enable Data Overwrite After Job Completion .
5.
Select OK .
6.
Select Restart Now if prompted.
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
Security Function Supplementary Guide
23