Xerox VersaLink B7030 Security Function Supplementary Manual - Page 23
Browse online or download pdf Security Function Supplementary Manual for Printer Accessories Xerox VersaLink B7030. Xerox VersaLink B7030 50 pages. Drum cartridge
Also for Xerox VersaLink B7030: Quick Use Manual (20 pages), Manual (6 pages), Maintenance (5 pages), Quick Start Manual (2 pages), Quick Use Manual (20 pages), Quick Use Manual (20 pages)
Print Page
Set IPSec
Before setting Digital Signature for IKE Authentication Method , you need to import an IPSec
certificate according to the same procedure as "Import Machine Certificates".
1.
Select Connectivity .
2.
Select IPSec .
3.
Enable IPSec
4.
Select Preshared Key or Digital Signature for IKE Authentication Method.
5.
When you select Preshared Key , enter a preshared key of 9 or more characters in Preshared Key and
Retype Preshared Key .
When you select Digital Signature , select the certificate name in Device Certificate .
6.
Enter the IP Address in Specify Destination IPv4 Address.
7.
Enter the IP Address in Specify Destination Ipv6 Address.
8.
Select Enabled or Disabled for Communicate with Non-IPSec Device.
9.
Select OK .
10. Select Restart Now if prompted.
Set Overwrite Hard Disk
Follow the procedure below to configure the Data Overwrite settings.
This feature is only applicable to HDD Model.
1.
Select System .
2.
Select Security .
3.
Select Edit for Disk Overwrite.
4.
Enable Data Overwrite After Job Completion .
5.
Select OK .
6.
Select Restart Now if prompted.
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
Security Function Supplementary Guide
23