Xerox Xerox DocuMate 4790 설정 - 페이지 2

{카테고리_이름} Xerox Xerox DocuMate 4790에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Xerox DocuMate 4790 6 페이지. Documate series for use with xerox freeflow makeready application
Xerox Xerox DocuMate 4790에 대해서도 마찬가지입니다: 매뉴얼 (24 페이지), 기능 설명서 (26 페이지)

페이지 인쇄

Setting up Xerox

1. Configuring FreeFlow MakeReady

i) To ensure the installation and testing goes smoothly, you are

required to check the following registry entry is set correctly.

a) Close the FreeFlow MakeReady application

b) Open the Registry Editor (Start>Run>regedit>'Enter')

c) Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Xerox\

Documents On Demand\CurrentVersion\Installation

(See screenshot above)

d) Open 'ScannerSelection' for editing, and set for '0'. Click 'OK'

e) Close the Registry Editor

ii) FreeFlow MakeReady should now be ready to use with your TWAIN

scanner driver.

2. Driver Installation

i) Before any installation/upgrade begins, ensure that you have

the latest drivers for the scanner(s) you will be installing. These

can be found at www.xeroxscanners.com. You will need both the

DriverPLUS driver and the Acuity installer packages for all scanners

being installed.

(See below)

Note:

When installing more than one type of scanner,

do not

attempt to use older non-DriverPLUS drivers

with DriverPLUS drivers.

Page 2

DocuMate

Scanners and Xerox

FreeFlow MakeReady

ii) When carrying out a driver upgrade, before proceeding ensure that

the scanner(s) are powered off or disconnected from the PC, and

currently installed drivers and/or software related to the scanner(s)

are uninstalled completely using the Windows Control Panel installed

programs removal option.

iii) The drivers and software should be installed in the following order.

Deviation from this could cause undesirable results and/or non-

functionality of the scanner drivers with FreeFlow MakeReady. If no

flatbed scanner is being used, ignore a) & b), and just install the ADF

scanner packages.

a) A3 flatbed scanner (DM4700) driver msi package

b) A3 flatbed scanner (DM4700) Acuity msi package

c) A3 ADF scanner (DM4790, DM4799 or DM6710) driver

msi package

d) A3 ADF scanner (DM4790, DM4799 or DM6710) Acuity

msi package

iv) When prompted during the installation process, connect the scan-

ner to the PC and power on. It is strongly advisable to connect the USB

cable(s) directly to the back of the PC, and not use the front USB ports

or an external USB hub, as this can cause communication issues.

v) When using a flatbed scanner (DM4700), they have the function-

ality to allow the ADF scanner (DM4790, DM4799 or DM6710) to

connect directly into the back of the scanner, creating a 'daisy chain'.

This option is useful when there are a limited number of available USB

ports on the back of the PC, but can increase image transfer times.

vi) After all drivers and software have been successfully installed, open

FreeFlow MakeReady, and go to 'File>Select Scanner Data Source'.

A window will open showing the available scanner sources.

all