Xerox DocuPrint 135 운영 매뉴얼 - 페이지 18
{카테고리_이름} Xerox DocuPrint 135에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuPrint 135 34 페이지. Tape client job submission guide enterprise printing system
Xerox DocuPrint 135에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지), 사양 (2 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 보충 설명서 (48 페이지)
페이지 인쇄
Product overview
Operating system software
Network Printer Series (NPS) and IPDS Printing System (IPS)
1- 2
You can switch between print modes by performing a few simple
steps. This procedure is described in chapter 3, "Changing print
modes."
The DocuPrint 100/115/135/155/180 EPS operates from the
standard internal fixed disk drive, and the EPS software release
level must be 2.10.00 or higher. The DocuPrint NPS/IPS operates
from an external fixed disk drive, and the NPS/IPS software level
must be 7.4.1 or higher.
Overview
The DocuPrint NPS/IPS enables personal computer (PC), Sun
workstation, DEC workstation, HP/Apollo, IBM RS/6000, and
Apple Macintosh users to print PostScript level 2, HP PCL5e, or
ASCII documents. These documents are then submitted to the
printing system over a network connection.
The system also enables IBM hosts running appropriate levels of
PSF to print IPDS data. The NPS/IPS emulates an IBM AFP
Group 3 Page Printer with the Advanced Function Image and
Graphics (AFIG) option.
The DocuPrint NPS/IPS can receive data at 240 or 300 dpi and
full-page IOCA images at 600 dpi. The system can also use 600
dpi fonts. All 240 or 300 dpi resources are interpolated to 600 dpi
by the printing system for higher print quality.
For more detailed DocuPrint NPS/IPS product information, refer to
the DocuPrint NPS/IPS System Overview Guide.
IBM hosts supported
The following IBM hosts are supported for NPS/IPS with a network
connection:
•
MVS
•
OS/2
•
OS/400 (TCP/IP only)
•
AIX
NPS/IPS Extension Operations Guide