Xerox DocuPrint 135 Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Xerox DocuPrint 135. Xerox DocuPrint 135 34 stron. Tape client job submission guide enterprise printing system
Również dla Xerox DocuPrint 135: Instrukcja obsługi (38 strony), Specyfikacje (2 strony), Podręcznik referencyjny (2 strony), Podręcznik planowania (20 strony), Podręcznik referencyjny (42 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik uzupełniający (48 strony)

Product overview

Operating system software

1- 2

You can switch between print modes by performing a few simple

steps. This procedure is described in chapter 3, "Changing print

modes."

The DocuPrint 100/115/135/155/180 EPS operates from the

standard internal fixed disk drive, and the EPS software release

level must be 2.10.00 or higher. The DocuPrint NPS/IPS operates

from an external fixed disk drive, and the NPS/IPS software level

must be 7.4.1 or higher.

Overview

The DocuPrint NPS/IPS enables personal computer (PC), Sun

workstation, DEC workstation, HP/Apollo, IBM RS/6000, and

Apple Macintosh users to print PostScript level 2, HP PCL5e, or

ASCII documents. These documents are then submitted to the

printing system over a network connection.

The system also enables IBM hosts running appropriate levels of

PSF to print IPDS data. The NPS/IPS emulates an IBM AFP

Group 3 Page Printer with the Advanced Function Image and

Graphics (AFIG) option.

The DocuPrint NPS/IPS can receive data at 240 or 300 dpi and

full-page IOCA images at 600 dpi. The system can also use 600

dpi fonts. All 240 or 300 dpi resources are interpolated to 600 dpi

by the printing system for higher print quality.

For more detailed DocuPrint NPS/IPS product information, refer to

the DocuPrint NPS/IPS System Overview Guide.

IBM hosts supported

The following IBM hosts are supported for NPS/IPS with a network

connection:

•

MVS

•

OS/2

•

OS/400 (TCP/IP only)

•

AIX

NPS/IPS Extension Operations Guide