Xerox iGen3 계획 매뉴얼 - 페이지 22

{카테고리_이름} Xerox iGen3에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox iGen3 38 페이지. Solutions planning guide
Xerox iGen3에 대해서도 마찬가지입니다: 브로셔 (8 페이지)

C.P. Bourg Document Finisher (BDFx)

Limitations

•

Due to the height of the bypass transport on DocuTech 1xx

HLC it is not possible to attach the BCFx without the BSR.

•

Requires a minimum of 2 skipped pitches (3 skipped pitches

with BCF), which results in low productivity with small

booklets. (A3/ 11 x 17 requires only one skipped pitch with or

without the BCF.)

•

The BDFx can only be guaranteed to work to its maximum

book thickness when feeding (8.5 x 11 / A4) paper if the

paperweight is 90 gsm or less. (Long grain paper with a

weight above 90 gsm should be tested with the customer

paper and application before selling the BDFx.)

•

Use of short grain paper is highly recommended for 11 x 17"

/ A3 sized paper.

Listed below are the dependencies and prerequisites for

installing the BDFx, BCFx and SQEDG module.

•

The printer must be equipped with a Bypass Transport to

enable In-line Finishing.

•

It is highly recommended that the printer is equipped with a

Bourg Sheet Rotator (BSR) to maximize output.

•