Xerox Phaser 7760 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Xerox Phaser 7760에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7760 16 페이지. Color laser printer
Xerox Phaser 7760에 대해서도 마찬가지입니다: 특징 (1 페이지), 사용자 설명서 (35 페이지), 평가자 매뉴얼 (20 페이지), 보충 설명서 (16 페이지), 설정 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (5 페이지), 평가자 매뉴얼 (20 페이지), 지침서 (6 페이지), 지침서 (14 페이지), 평가자 매뉴얼 (21 페이지), 평가자 매뉴얼 (18 페이지), 경쟁사 비교 (2 페이지), 경쟁사 비교 (1 페이지)

Date Issued: 11 Jan 2007

SF 224

Product: Phaser 7760

Operational Groups: All

PROBLEM:

The Phaser 7760 no longer recognizes the Imaging Units as the correct

ones for the product after the Engine NVRAM board (MCU-MF NVM

PWB, P/N 160K76652) is changed.

If the Store Engine NVRAM function is not performed before replacing

the Engine NVRAM Board, the correct parameter for recognizing Phaser

7760 Imaging Units will be lost.

CAUSE:

The Engine NVRAM Board is a common part used in many different

products. In order to function correctly in a particular product, a

number of parameters must be programmed. One of these parameters is

the unique code that recognizes the Imaging Units specifically

designated for that product. These codes are programmed to the Engine

NVRAM Board during production. In order to be written correctly to a

replacement NVRAM board, the Store Engine NVRAM and Resetting

NVRAM procedures within diagnostics should be followed.

SOLUTION:

If the Phaser 7760 Image Unit are no longer correctly recognized after

replacing the Engine NVRAM Board and the Resetting NVRAM

procedure within diagnostics does not restore this functionality;

1. Send the Image Unit ID postscript snippet to the printer.

a. This snippet can be downloaded from:

http://www.office.xerox.com/

trademarks of Xerox Corporation in the United States and/or other countries.

SERVICE FLASH

2. Verify that the printer recognizes the Image Units correctly after

the snippet has been downloaded.

3. Perform the Store Engine NVRAM procedure in diagnostics.

Complete the part's green card and include it with each part returned

North America: Return replaced parts to the logistics center named o

the shipping box's pre-printed return shipping label.

Outside North America: Return parts as per your normal channels.

PART INVENTORY STRATEGY

N/A.

JAB

b. Select Drivers and Utilities and enter 7760 in the product

name field.

c. If necessary, instructions for Downloading Firmware

Update Files can be obtained on the same web page.

1 of 1