Xerox WorkCentre Pro 238 보충 설명서 - 페이지 7

{카테고리_이름} Xerox WorkCentre Pro 238에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre Pro 238 20 페이지. Xerox multifunction printers detailed specifications
Xerox WorkCentre Pro 238에 대해서도 마찬가지입니다: 참조 매뉴얼 (27 페이지), 사양 (21 페이지), 평가자 매뉴얼 (27 페이지)

페이지 인쇄

Creating tab masters

Your document must contain a page with the text you want printed on the tab for

each tab divider in the set. These are called the tab master pages and are the same

size as the body of your document, either 8.5x11 inches or A4. The pages must be

inserted in the correct place in your document.

To create the tab master pages you can either use the Xerox Tab Template or create

your own tab master pages.

Using Xerox tab master template

Xerox provides templates for 5 position tab masters for A4 or 8.5x11 inch

documents in Microsoft Word. The templates can be downloaded from:

http://www.xerox.com/ - search on Tab Template

Open the template you require, save it as another file and change the text on

the tabs as required.

If you are making the tab masters for a copy job, print the tab master pages

onto plain stock either 8.5x11 inches or A4 and insert the prints into the

appropriate places in your original document.

If you are creating tab masters for a print job, cut and paste the tab master

pages into the appropriate places in your document.

You are now ready to copy or print your job.

Creating your own tab master pages

If you do not have access to the internet, or you use an application other than

Microsoft Word, create your own tab master pages as follows:

Note:

Create a document with as many pages as you require tab dividers.

Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement

Your CopyCentre or WorkCentre will copy the information printed on a

standard A4 or 8.5x11 inch sheet of paper and shift the image to the right

so that it is copied onto the tab.

2 Setup