Xerox WorkCentre Pro 238 보충 설명서 - 페이지 8
{카테고리_이름} Xerox WorkCentre Pro 238에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre Pro 238 20 페이지. Xerox multifunction printers detailed specifications
Xerox WorkCentre Pro 238에 대해서도 마찬가지입니다: 참조 매뉴얼 (27 페이지), 사양 (21 페이지), 평가자 매뉴얼 (27 페이지)
페이지 인쇄
2 Setup
2
On each page create a text box on the right hand side of the page containing
the text you want on each tab. Position the text box vertically to correspond
with the tab positions. The text can be vertical, read from the left side of the
page or read from the right side of the page.
3
Print the document onto plain paper.
4
Lay the prints of the tab master pages over the tab stock and check the vertical
position of the text against each tab. You may need to adjust the vertical
position of the text boxes on your master to make the text align correctly with
the respective tabs.
5
If you are making the tab masters for a copy job, print the tab master pages
onto plain stock either 8.5x11 inches or A4 and insert the prints into the
appropriate places in your original document.
6
If you are creating tab masters for a print job, cut and paste the tab master
pages into the appropriate places in your document. Note the page numbers of
the tab master pages in your document. You will need this information later.
7
You are now ready to copy or print your job.
6
Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
Tab test read from
Vertical text
the left
1
2
3
Tab test read from
the right