Calf-Tel MultiMax 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} Calf-Tel MultiMax에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Calf-Tel MultiMax 7 페이지.
Calf-Tel MultiMax에 대해서도 마찬가지입니다: 조립 지침 (4 페이지)

Step 1. Base Lumber Kit

Lumber size:

2 pcs - 4" x 4" x 99.125"

2 pcs – 4" x 6" x 88.125"

A. Using 13/64" (5mm) Drill Bit, drill (8) pilot holes. Repeat for all 4 corners (See Figure 1)

Step 2: Assemble Base

A. Using 5/16" (8mm) Deep Well Socket, assemble lumber using (2) 1" (25.4mm) washers with

(2) 5-1/2 x ¼ (139.7mm x 6mm) Lag Screws. Repeat for all 4 corners (See Figure 1)

Step 3: Assemble Base to Hutch

A. Using 5/16" (8mm) Deep Well Socket, washers and screws, fasten (2) brackets (included in

hardware kit) near entrance securing Hutch to Base (see figure 2)

Fasten Hutch to Base at remaining locations around perimeter using washers and screws

Revised: 11/28/18 LIT-1412 Rev D

Optional Item – Lumber Kit

Hampel, W194 N11551 McCormick Drive, Germantown, WI 53022

Phone: 262-255-4540 Fax:262-255-9731

(101.6mm x 101.6mm x 2517.7)

(101.6mm x 152.4mm x 2136.7)

Locate 13/64" (5mm) Pilot holes

at approximate center of lumber

Figure 1