Calf-Tel MultiMax Montaj Talimatları Kılavuzu - Sayfa 6

Çiftlik Ekipmanları Calf-Tel MultiMax için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Calf-Tel MultiMax 7 sayfaları.
Ayrıca Calf-Tel MultiMax için: Montaj Talimatları (4 sayfalar)

Sayfayı Yazdır

Step 1. Base Lumber Kit

Lumber size:

2 pcs - 4" x 4" x 99.125"

2 pcs – 4" x 6" x 88.125"

A. Using 13/64" (5mm) Drill Bit, drill (8) pilot holes. Repeat for all 4 corners (See Figure 1)

Step 2: Assemble Base

A. Using 5/16" (8mm) Deep Well Socket, assemble lumber using (2) 1" (25.4mm) washers with

(2) 5-1/2 x ¼ (139.7mm x 6mm) Lag Screws. Repeat for all 4 corners (See Figure 1)

Step 3: Assemble Base to Hutch

A. Using 5/16" (8mm) Deep Well Socket, washers and screws, fasten (2) brackets (included in

hardware kit) near entrance securing Hutch to Base (see figure 2)

Fasten Hutch to Base at remaining locations around perimeter using washers and screws

Revised: 11/28/18 LIT-1412 Rev D

Optional Item – Lumber Kit

Hampel, W194 N11551 McCormick Drive, Germantown, WI 53022

Phone: 262-255-4540 Fax:262-255-9731

(101.6mm x 101.6mm x 2517.7)

(101.6mm x 152.4mm x 2136.7)

Locate 13/64" (5mm) Pilot holes

at approximate center of lumber

Figure 1