Calf-Tel MultiMax 조립 지침 - 페이지 3

{카테고리_이름} Calf-Tel MultiMax에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Calf-Tel MultiMax 4 페이지.
Calf-Tel MultiMax에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (7 페이지)

3. Assemble the MultiMax Hutch

a) You will need:

 Left and right side panels, roof and back

 Bag of hutch fixing components AH-151-1

b) Place the left and right sides of the MultiMax

on the ground standing upright approx. 5 feet

(1.5m) apart as shown.

c) Attach the back of the MultiMax to the

sides. Bolt the back onto the outside of the

sides using the small bolts and back up

washers starting at the top. Insert the bolt with a washer from the inside and

attach a washer and nut from the outside.

d) Attach the roof. Put the roof over the back and sides. The sides should be

adjusted so the ribs on the roof line up with the ribs on the sides. Bolt the roof

to the sides starting at the back. Insert a bolt with a washer from the inside and

attach a washer and nut from the outside.

e) Occasionally the pre-drilled holes in the sides are missing or do not line up and

will need to be re-drilled with a 6mm drill bit using the holes in the top and back

as a template.

Start attaching roof here: 5 bolts per side. Save 2 bolts per side to

attach through tabs at front in stage 5.

Start attaching back here: 8 bolts on each side and 9 across the top.