Calf-Tel MultiMax Instrukcja montażu - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt rolniczy Calf-Tel MultiMax. Calf-Tel MultiMax 4 stron.
Również dla Calf-Tel MultiMax: Instrukcja montażu (7 strony)
Drukuj stronę3. Assemble the MultiMax Hutch
a) You will need:
Left and right side panels, roof and back
Bag of hutch fixing components AH-151-1
b) Place the left and right sides of the MultiMax
on the ground standing upright approx. 5 feet
(1.5m) apart as shown.
c) Attach the back of the MultiMax to the
sides. Bolt the back onto the outside of the
sides using the small bolts and back up
washers starting at the top. Insert the bolt with a washer from the inside and
attach a washer and nut from the outside.
d) Attach the roof. Put the roof over the back and sides. The sides should be
adjusted so the ribs on the roof line up with the ribs on the sides. Bolt the roof
to the sides starting at the back. Insert a bolt with a washer from the inside and
attach a washer and nut from the outside.
e) Occasionally the pre-drilled holes in the sides are missing or do not line up and
will need to be re-drilled with a 6mm drill bit using the holes in the top and back
as a template.
Start attaching roof here: 5 bolts per side. Save 2 bolts per side to
attach through tabs at front in stage 5.
Start attaching back here: 8 bolts on each side and 9 across the top.