Alderon Industries VersAlarm I/O VLIO-0001 사용자 설명서 - 페이지 13
{카테고리_이름} Alderon Industries VersAlarm I/O VLIO-0001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alderon Industries VersAlarm I/O VLIO-0001 20 페이지. Indoor/outdoor alarm panel
Alderon Industries VersAlarm I/O VLIO-0001에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
VersAlarm™ I/O | USER GUIDE
Alarm Auxiliary with Auto Dialer
The diagram below includes the VersAlarm™ I/O, auto dialer, and WaterSpotter™ probe sensor. The WaterSpotter™ probe
sensor is connected to the sensor input on the alarm for high water indication and the auto dialer is connected to the auxiliary
contacts. If water has not reached the probes, then the top cover of the enclosure will be green. If the probes are partially or fully
submerged, then the top cover of the enclosure will flash red, the buzzer will annunciate, and auxiliary contacts close activating
the input of the auto dialer sending a voice message to programmed number(s). The alarm condition will stay on until the water
level is below the probes. If the silence pushbutton is pressed during an alarm condition, then the top cover of the enclosure will
turn solid red and the buzzer will silence. The silence condition will reset when the probe sensor deactivates. If the alarm is in
silence mode for longer than 24 hours, the alarm will reactivate.
VersAlarm™ I/O
Auto
Dialer
WaterSpotter™
House to Yard
Probe Sensor
Alderon Industries™ - Leading Edge Control Products | 13