eControls Comfort365 C365T11 설치 프로그램 및 사용자 설명서 - 페이지 7
{카테고리_이름} eControls Comfort365 C365T11에 대한 설치 프로그램 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. eControls Comfort365 C365T11 13 페이지.
eControls Comfort365 C365T11에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 설치 프로그램 및 사용자 설명서 (13 페이지), 사용자 설명서 (4 페이지), 설치 프로그램 및 사용자 설명서 (13 페이지), 설치 프로그램 및 사용자 설명서 (13 페이지), 설치 (2 페이지)
페이지 인쇄
14 Night Level LCD Backlight
The LCD has a low level backlight that can be used as a night light.
Use the
UP
key to turn the low
level backlight ON or the
DOWN
key to turn OFF.
Touch NEXT or ENTER.
15 Airflow Control
This option turns the automatic airflow control on or off. If off, dampers
fully open, nighttime airflow options are disabled and airflow is no
longer displayed on the thermostat.
Use the
UP
key to select ON
for airflow control or the
DOWN
key to select OFF to disable
airflow control.
Touch NEXT or ENTER.
If Airflow Control was off and is now
being turned on, the Nighttime Airflow
option needs to be turned on using
the User Options.
16 Enable USER Airflow Control
Homeowners with an unusual work schedule or home office, etc. may
want to use this option. When turned On, this option enables the user to
turn off automatic airflow control in the User Options. Airflow is adjusted
by the homeowner. The Nighttime Airflow option is still enabled but can
be turned off using the User Options.
Use the
UP
key to select ON to
enable the user to turn off
automatic airflow control in the
user options.
Touch NEXT or ENTER.
For options 17 - 20, use the installer test o
determine the max
imum allowable airflow.
17 Maximum Airflow in Heating to Sleeping Area
Use the
UP/DOWN
keys to
select the maximum allowable
airflow in heating to the
sleeping area.
Touch
NEXT
to display the next
option, or
ENTER
to save the
option.
Option
Night
NEXT
ENTER
Factory Default: On. Range: On or Off.
Sleeping
Option
Airflow %
Living
NEXT
ENTER
Factory Default: On. Range: On or Off.
Option
NEXT
ENTER
Factory Default: Off. Range: On or Off.
n page 8 to
Sleeping
Option
Heat
Airflow %
NEXT
ENTER
Factory Default: 150%. Range: 100% to 160%.
18 Maximum Airflow in Cooling to Sleeping Area
Use the
UP/DOWN
keys to
select the maximum allowable
airflow in cooling to sleeping
area.
Touch NEXT or ENTER.
19 Maximum Airflow in Heating to Living Area
Use the
UP/DOWN
keys to
select the maximum allowable
airflow in heating to the living
area.
Touch NEXT or ENTER.
20 Maximum Airflow in Cooling to Living Area
Use the
UP/DOWN
keys to
select the maximum allowable
airflow in cooling to the living
area.
Touch NEXT or ENTER.
21 Maximum Temperature Differential
This the maximum allowable temperature difference between the
sleeping area and the living area temperatures. When the temperature
difference is equal to or greater than the allowed differential, the airflow
is adjusted.
Use the
UP/DOWN
keys to
select the maximum allowable
temperature difference between
the sleeping and living areas.
Touch
NEXT
or
ENTER.
22 Factory Restore
WARNING! Factory Restore resets ALL settings.
To exit this option, touch
NEXT
To restore factory settings, touch the
Enter.
Option
NEXT
ENTER
7
Sleeping
Option
Airflow %
Cool
NEXT
ENTER
Factory Default: 140%. Range: 100% to 160%.
Option
Heat
Airflow %
Living
NEXT
ENTER
Factory Default: 150%. Range: 100% to 160%.
Option
Airflow %
Cool
Living
NEXT
ENTER
Factory Default: 140%. Range: 100% to 160%.
Option
NEXT
ENTER
o
Factory Default: 2 F.
Range: 0 to 10 F
or
ENTER, or the hidden Back key.
UP
key to display YES then touch
Option
NEXT
ENTER
o
o