Yamaha AES620 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Yamaha AES620에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AES620 14 페이지. Owners manual
Yamaha AES620에 대해서도 마찬가지입니다: 서비스 매뉴얼 (4 페이지)

TRUSS ROD ADJUSTMENT

The curvature of the neck should be slightly concave.

Clockwise rotation of the nut tightens the rod and corrects for

too much concave bow. Counterclockwise rotation of the nut

loosens the rod and corrects for too much convex bend. Make

any adjustments gradually. Allow five to ten minutes for setting,

and check the curvature after each 1/2 turn of the truss rod

nut.

If too much

concave bow

convex bend

NOTE: Unless you have experience with truss rods, we sug-

gest that you entrust this adjustment to your dealer.

The height of the pickup (i.e. distance from the strings) affects

gain — the higher the pickup, the louder the sound, and vice

versa. If the pickup is set too high, sustain and playability will

suffer because of the magnetic pull on the strings. Adjust over-

all height using the screws located at either side of the pickup.

If the pickup has individually adjustable polepieces (most hum-

buckers do), these can then be adjusted to achieve the best

overall balance. The polepieces should normally be about 2 or

3 millimeters from the strings.

Single-coil Pickup

concave

convex

Height adjustment screw

Humbucking Pickup

Adjustable polepiece

Height adjustment screw