Yamaha Bassoons 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Yamaha Bassoons에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Bassoons 15 페이지. Bassoon

Assembly

Before Assembling the Instrument

(Please pay close attention to the following)

The bassoon is made from natural wood and precision metal parts. When holding or

assembling the instrument, make sure the keys are protected from damage due to

impacts, etc.

Also, if the joint is tight or stiff when assembling the instrument, apply a thin layer of

cork grease and try inserting it into the receiver again. Be careful not to apply too much

cork grease. If the joint is still tight, apply a small amount of cork grease to the receiver.

■ Assembling the Instrument

Assembling the Tenor Joint

and Double Joint

Insert the tenor joint into the double joint.

Rotate the tenor joint to the right to

assemble. At this time, make sure that

there is even spacing between the tenor

joint's curved hollow lining and the bass

joint's socket.

Tenor Joint

Double Joint

* If the tenor joint was rotated too far, remove

the joint in a manner that does not damage

the key connections and try assembling

again. Forcibly rotating the joint in the op-

posite direction when keys are in contact

with each other can damage the keys.

Assembling the Bass Joint and

Double Joint

Assemble the bass joint so that the C# and Eb

keys do not come into contact with the tenor

joint.

Insert the bass joint about halfway into the

double joint.