Yamaha disklavier MX-100B 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Yamaha disklavier MX-100B에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha disklavier MX-100B 50 페이지.

2. Adjusting the key stop rail

Height adjustment

Adjust the mounting screws

stop rail is 0 (visually).

* If the screws are excessively tightened ... the key touch will become heavy.

* If the screws are insufficiently tightened .. the keys will pop up during playback

3. Adjusting the pedal drive unit

so that the gap between the top of the black keys and the key

Pedal solenoid

Wire

Pedal lever hook

Pedal lever clamp

Pedal level rubber

Adjust the length of the wire so that the gap at

5 mm.... for the soft pedal

3 mm.... for the damper pedal

After adjusting the nut

* Set the wire so that it is vertical in both the front/

back and left/right directions.

If the wire is slanted, the solenoid axis will be off

center, causing mechanical noise.

MX-100B

notes will not

sound correctly

Pedal rod

Pedal rod dowel

Hex nut M4

Pedal lever

, tighten the nut