17
Chapter 2—Console Window
P
Delay Time
This parameter is used to set the delay time of the Delay function. Delay times can be set by
dragging.
Q
Channel number
Displays the Channel number of the channel.
R
AUX section
These controls are used to set the levels of the 12 Aux Sends. To turn an Aux Send
on or off, click its number. To set an Aux Send level, drag the end of the bar next
to the Aux Send's number or click a point along the length of the bar.
The table below shows how the Input Channel's Aux Send controls appear
depending on their status. See page 23 for information on how to switch Aux
Sends to pre-fader or post-fader positions.
S
Pan/Aux Send
This parameter shows either the stereo or surround pan position and, during Aux Send set-
ting, the parameter shows the Aux Send level in dB.
T
Pan control
This control is used to set the Input Channel's stereo or surround pan position. When the
PAN CONTROL in the Master Section is set to "STEREO," the Pan control appears as a
rotary control, and when set to "SURR," the control appears as dot on a pan graph. The sur-
round pan position can be set by dragging the dot.
U
LFE control
This control is used to set the surround LFE Channel level. It appears when the
PAN CONTROL in the Master Section is set to "SURR." To set the LFE level,
drag the end of its bar or click a point along the length of the bar.
V
AUTO button
This button is not used in Version 1.0 of Studio Manager for DM2000.
W
SELECT button
This button is used to select the Input Channel.
X
SOLO button
This button solos the Input Channel and is colored orange when the channel is soloed.
Y
ON button
This button turns the Input Channel on and off. It is colored orange when the channel is
turned on.
Z
Short Channel name
This is the channel's Short Channel name, which can be edited. To edit the name, click it
and type.
a
Channel Fader
This control is used to set the level of the Input Channel.
b
Channel Meter
This meter displays the signal level of the Input Channel.
Studio Manager—Owner's Manual
Aux Send status
Either on or off but no level set
Off, pre-fader
On, pre-fader
Off, post-fader
On, post-fader
Bar appearance on Input Channel
Dark blue bar
Green bar outline displays level
Green bar displays level
Orange bar outline displays level
Orange bar displays level
페이지 인쇄