Yamaha DM 2000 Version 2 소유자 매뉴얼 - 페이지 30

{카테고리_이름} Yamaha DM 2000 Version 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DM 2000 Version 2 44 페이지. Version 2
Yamaha DM 2000 Version 2에 대해서도 마찬가지입니다: 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (22 페이지), 소프트웨어 설치 매뉴얼 (13 페이지), 소유자 매뉴얼 (1 페이지), 보충 설명서 (4 페이지), 소유자 매뉴얼 (37 페이지), 설정 매뉴얼 (35 페이지), 오리엔테이션 매뉴얼 (8 페이지), 이중화 매뉴얼 (8 페이지), 소유자 매뉴얼 (3 페이지), (독일어) 운영 체제 설치 매뉴얼 (13 페이지)

Chapter 3—Selected Channel Window

Stereo Out

The Selected Channel window for the Stereo Out is shown below. Note that this window

cannot be opened from the Windows menu if a Remote Layer is selected.

CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that

appears, or by clicking the left and right Channel Select buttons. This section also displays

the Long Channel name, which can be edited. To edit the name, click it and type. The

LIBRARY button is not used in Version 1.0 of Studio Manager for DM2000.

EQUALIZER section

This section contains the controls and display graph for the Stereo Out's 4-band Parametric

Equalizer and is identical to the Equalizer section of the Input Channels. See page 23.

DELAY section

This section contains the controls for the Stereo Out's Delay function. The rotary control is

used to set the delay time, and the ON button turns the Delay function on and off.

Stereo Out Pan/Level section

This section contains the Pan control, Channel ON button, and the Channel Fader for the

Stereo Out. The AUTO button is not used in Version 1.0 of Studio Manager for DM2000.

COMPRESSOR section

This section contains the controls and display graph for the Stereo Out's Compressor and is

identical to the Compressor section of the Input Channels except that there is no LINK but-

ton. See page 23.

INSERT section

This section contains the parameters for the Stereo Out's Insert. The INSERT button turns

the Insert on and off. The OUT and IN parameters are used to select the channel's Insert

Studio Manager—Owner's Manual