Yamaha DM 2000 Version 2 소프트웨어 설치 매뉴얼 - 페이지 6

{카테고리_이름} Yamaha DM 2000 Version 2에 대한 소프트웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DM 2000 Version 2 13 페이지. Version 2
Yamaha DM 2000 Version 2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (44 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (22 페이지), 소유자 매뉴얼 (1 페이지), 보충 설명서 (4 페이지), 소유자 매뉴얼 (37 페이지), 설정 매뉴얼 (35 페이지), 오리엔테이션 매뉴얼 (8 페이지), 이중화 매뉴얼 (8 페이지), 소유자 매뉴얼 (3 페이지), (독일어) 운영 체제 설치 매뉴얼 (13 페이지)

Select [Get access key from authentication server],

then click [Next].

The following window opens.

Select [Create registration code], then click [Next].

The following I/O port setting window opens.

Make sure that "YAMAHA USB IN 0-1" is selected

for the Input port and that "YAMAHA USB OUT 0-

1" is selected for the output port, then click

[Next].

The "Connecting to the console..." message appears and

the registration code is created.

If you are using Mac OS 9, select "xxxx-1 (xxxx will be the

name of the console you are using)" for the Input port, and

"xxxx-1 (xxxx will be the name of the console you are

using)" for the output port. Note that the port names vary

with the OMS setup files.

DM2000/02R96/DM1000 Version2 System Software Installation Guide

The "Console's FLASH UPDATE is Ver1." message

appears.

If your Flash Update has been updated to the latest version,

this message does not appear. Instead, a registration code

will be displayed; please proceed to step 14.

Click [Next].

A message indicating the progress of the update process

appears, and Flash Update is updated. The updating

process takes about one minute (or five minutes on Mac

OS X).

The "Completed upgrade for FLASH UPDATE."

message appears.

NOTE: A different message (see page 10) may appear in various

system environments. In this case, quit the installer following the on-

screen instruction. Turn off the power to the console, then press and

hold down the [REC] button (on the DM1000, the [CLEAR] key)

and turn on the power. The console displays "FLASH UPDATE."

Start the installer and repeat Steps 5 through 9. Proceed to Step 14.

Turn off the power to the console, then press and

hold down the [REC] button (on the DM1000, the

[CLEAR] key) and turn on the power.

The console displays "FLASH UPDATE." Click

[Next].

The registration code appears.