Yamaha DM 2000 Version 2 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Yamaha DM 2000 Version 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DM 2000 Version 2 37 페이지. Version 2
Yamaha DM 2000 Version 2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (44 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (22 페이지), 소프트웨어 설치 매뉴얼 (13 페이지), 소유자 매뉴얼 (1 페이지), 보충 설명서 (4 페이지), 설정 매뉴얼 (35 페이지), 오리엔테이션 매뉴얼 (8 페이지), 이중화 매뉴얼 (8 페이지), 소유자 매뉴얼 (3 페이지), (독일어) 운영 체제 설치 매뉴얼 (13 페이지)

Output Channels

When the Master Layer is selected, the Bus Out, Aux Send, and Matrix Send channels are

displayed. A Bus Out channel is shown here. Aux Send and Matrix Send channels appear

the same except that they do not have a STEREO button.

STEREO button (Bus Out only)

This button is used to route the Bus Out to the Stereo Out.

This button is used to turn on and off the Bus Out's Insert.

COMP button

This button is used to turn on and off the Bus Out's Compressor.

Compressor curve

This display shows the Compressor's curve.

EQ button

This button is used to turn on and off the Bus Out's EQ.

EQ curve

This display shows the Equalizer's curve, which can be set by

dragging.

DELAY button

This button is used to turn on and off the Bus Out's Delay func-

tion.

Delay parameter

This parameter is used to set the delay time of the Delay func-

tion. Delay times can be set by dragging.

Channel number

This is the channel number.

AUTO button

This button displays the Automix status of the Bus Out.

SELECT button

This button is used to select the Bus Out.

SOLO button

This button solos the Bus Out. It appears orange while the Bus

Out is soloed.

ON button

This button turns the Bus Out on and off. It appears orange

while the channel is on.

Short channel name

This is the channel's short name. To edit the name, click it and

type.

Channel fader

This is the Bus Out's fader.

Channel meter

This meter displays the signal level of the Bus Out.

Studio Manager for DM2000 V1.1—Owner's Manual

Output Channels