Yamaha DX27 소유자 매뉴얼 - 페이지 21

{카테고리_이름} Yamaha DX27에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DX27 25 페이지. Digital programmable algorithm synthesizer
Yamaha DX27에 대해서도 마찬가지입니다: 음성 프로그래밍 매뉴얼 (19 페이지), 소유자 매뉴얼 (26 페이지), 소유자 매뉴얼 (39 페이지), 소유자 매뉴얼 (25 페이지), 서비스 매뉴얼 (31 페이지), 사용자 설명서 (19 페이지)

페이지 인쇄

IN NORMAL MODE

MAX

IN SHIFT MODE

NORMAL MODE PRESETS

SHIFT MODE PRESETS

101 ~ 424

INTERNAL RAM 1 ~ 24 {

| INTERNAL ВАМ 1 ~ 24

MIN

DATA

ENTRY

The BANK memories are not actually loaded with the voice data, but the voice

number. Thus, when

a BANK memory location is selected, the voice corre-

sponding to the voice number stored in that location is called from its memory

in either the INTERNAL or PRESET memories.

9: CASSETTE SAVEIVERIFY

SAVE/VERIFY

CASSETTE

This function actually has two "sub-functions": SAVE and VERIFY. After calling

this function, subsequent presses of button #9 alternates between the SAVE and

VERIFY sub-functions.

Normally, however, you will start with the SAVE function,

which saves the entire contents of the DX27/27S's INTERNAL voice memory onto

cassette tape. The VERIFY function is then used to compare the data saved on

cassette with the data still in INTERNAL memory, to make sure that no errors occured

in the SAVE process.

Before using this function, make sure that an appropriate data cassette recorder

is properly connected to the DX27/27S, as described in CHAPTER I: SETTING

UP.

When this function is initially called, the LCD will read "Save to Tape ?" Confirm

your intention to save the contents of the 24 voices to cassette tape by pressing

the +1 button. The display will then read "Save ready?" At this point, make sure

that the cassette recorder is set up properly with a suitable blank tape, and then

set up the recorder to begin recording. To perform the actual save operation, press

the +1 button.

(Pressing the -1 button prior to the final step in the above process

will abort the CASSETTE SAVE function.) As the DX27/27S saves each voice to

tape, the LCD display will indicate the voice number being saved.

When all 24 voices have been saved, the DX27/27S will automatically go into the

VERIFY mode, so that you can make sure that the data was recorded properly.

Stop the cassette recorder. The LCD will now read "Verify Tape ?" To verify, first

rewind the tape to the beginning of the data just saved, and then press the +1

button in response to the "Verify Tape ?" display showing. The display will now

read "Verify ready?" Press the +1 button to confirm and then start the cassette

recorder (playing). The DX27/27S will now read in each voice from the cassette

tape, and compare it with the corresponding voice data in the INTERNAL voice

memory, while the LCD indicates the verification process. If the cassette and IN-

TERNAL data matches, the display will read "Verify Completed." You can then enter

any of the PLAY modes by simply pressing the corresponding mode selector button.

If an error is encountered, this will be displayed on the LCD.

If this happens, go

back and try the SAVE process—followed by the VERIFY process—one more time.

If the error persists, then you may have to carefully adjust the record and/or playback

level of the cassette recorder, or use a higher quality recorder or tape. Be sure to

check that all cassette connections are set up properly.

Ware

359373