Yamaha REVSTAR 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha REVSTAR에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha REVSTAR 15 페이지.
Yamaha REVSTAR에 대해서도 마찬가지입니다: 소유자 매뉴얼 (14 페이지)

TUNING MACHINE TENSION ADJUSTMENT

The tuning machines have spring-loaded mechanisms which

automatically take up wear, preventing backlash. However, it is

possible to adjust the amount of pressure required to turn the

machines. Each machine has a tension adjustment screw, as il-

lustrated.

Loosen

Clockwise screw rotation tightens the machine. The tuning ma-

chines should be adjusted to the extent that they are firm, but

can turn smoothly. This adjustment is normally unnecessary, and

excessive tightening can lead to premature tuning machine wear.

Tighten

HEIGHT ADJUSTABLE LOCKING NUT

1) Remove the three hexagonal screws (A) that fix the Lock Pads.

2) Loosen the four screws (B) that attach the Nut Base to the neck.

3) Adjust the height by the two Height Adjustment Screws (C).

The Nut Base gets higher by clockwise rotation, and lower by

counterclockwise rotation.

4) After adjusting, tighten the four screws (B).

NOTE: As the height has been adjusted in the best condition

in the factory, please avoid the adjustment unless you

have suitable experience. We suggest that you entrust

this adjustment to your dealer.

(If applicable)