Yamaha Silent Piano SC2 소유자 매뉴얼 - 페이지 35

{카테고리_이름} Yamaha Silent Piano SC2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Piano SC2 47 페이지.

Setting range: A3 = 414.8 Hz – 466.8 Hz (approx. 0.2 Hz steps)

Default setting: A3 = 440.0 Hz

NOTE

The pitch of an Audio Song is not affected by this setting. The pitch of a MIDI Song is changed, but the setting cannot be

recorded.

 Transpose

Shifts the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key

signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments.

For example, if you set this parameter to "5, " playing key C produces pitch F. In this way, you can play the F

major song as if it were in C major.

Setting range: -6 – 0 – +6 (in semitone steps)

Default setting: 0

NOTE

• The sound input from the external device and the recorded Songs cannot be transposed.

• Your keyboard performance data will be transmitted with the transposed note numbers while MIDI note numbers received

from an external MIDI device or computer will not be affected by the Transpose setting.

 Half Pedal Point

You can sets the degree to which pressing the damper pedal applies the half-pedal effect. The larger the value,

the wider the half-pedal range. Larger values give you greater leeway in controlling the half-pedal effect.

Setting range: -2 – 0 – +4

Default setting: 0

Half-pedal function

This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the

pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a

bit murky and loud with too much sustain, you can release the pedal half way to subdue the sustain (murkiness).

Lowest key (A-1)

F#2: -6

F#3: +6

C3: 0

A#5: -2

Highest

C6: 0

key (C7)

E6: +4

SC2 Owner's Manual