Yamaha Sonogenic SHS-500 참조 매뉴얼 - 페이지 24
{카테고리_이름} Yamaha Sonogenic SHS-500에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Sonogenic SHS-500 28 페이지.
Yamaha Sonogenic SHS-500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (45 페이지)
페이지 인쇄
Effect List
Select the desired effect with the [EFFECT] selector then set its value with the [EFFECT CONTROL]
knob.
Effect
FILTER
Filter
NOTE
Effect name and its value will appear in the
display for a few seconds. This is same as
the following effects.
DYNAMICS
Dynamics
Filter shapes the sound by allowing only a specified range
of frequencies to pass and/or by producing a resonance
peak at the "cutoff" frequency. Filter can be used to create
a range of synthesizer-like sounds.
Filter has two internal parameters Cutoff and Resonance.
Making a setting here automatically changes the setting of
Setting
these parameters as well.
value
Cutoff:
Adjusts the cutoff frequency, and therefore the brightness
of the sound. The higher the value, the brighter the sound.
Resonance:
Adjusts the amount of Resonance applied at the cutoff
frequency. The higher value increases the Resonance to
emphasize the frequencies at the cutoff frequency, resulting
in an exaggerated peak.
Selecting another Voice resets both Cutoff and Resonance
to 64.
Setting value: 0 – 127
Default: Cutoff: 64, Resonance: 64
Sets the touch sensitivity of the keyboard. Lower values
produce greater volume variation in response to keyboard
dynamics—in other words, providing greater sensitivity and
making it easier to produce wide dynamic changes. Higher
values produce a more uniform response—in other words,
providing less sensitivity and making it easier to produce
Setting
value
loud sounds in your performance.
Selecting another Voice resets the effect depth value you
have set.
Setting value: 0 – 127
Default: Depends on the Voice
24
Description