Yamaha YT2030MS 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Yamaha YT2030MS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YT2030MS 9 페이지. Vibraphone, metallophone

Assembly

3. Tighten the screws in the order of q slant stays

and w pedal stay.

4. Set the main unit upside down.

To prevent damage to the floor and the main unit, leave the

main unit in the shipping package, or place a carpet or a

soft cloth on the floor where the main unit will be placed.

5. Turn the leg assembly upside down, put it on the

main unit, and then secure it with the four screws.

NOTE

If the direction of legs and main unit is not correct, the location

pins and holes may be misaligned, and may not be assembled

properly.

Be careful not to pinch

your fingers!

CAUTION

6 • YV2030MS YT2030MS Owner's Manual

6. To prevent the pedal from moving uncontrollably,

secure the damper by hooking the damper belt tip

to the hook of the main unit.

Dumper belt

7. Stand the instrument upright while being careful

to avoid overturning or falling of instrument.

8. Lock the casters by pressing the stoppers of the

left and right casters.

9. Lower the damper pedal.

Unbuckle the damper belt to avoid excessive tension to the

belt when raising the position of the instrument height in

step 11.