Yamaha YV-3710 소유자 매뉴얼 - 페이지 19

{카테고리_이름} Yamaha YV-3710에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YV-3710 28 페이지. Concert vibraphones
Yamaha YV-3710에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (34 페이지)

페이지 인쇄

⁄0

ADJUSTMENTS

10-1 Pedal Stroke Adjustment

Loosen the center rod fixing bolts to adjust the

protruding length of the center rod to the desired

pedal stroke, and retighten the bolts. The recom-

mended stroke (distance between pedal and floor)

is 9/16" to 13/16" (1.5 to 2 cm).

10-2 Wire Clip Adjustment

For shipment the wire clip is initially set at a low position for packing reasons. For

normal use this clip should be adjusted as follows: With the pedal released loosen the

fixing bolt of the wire clip, shift the clip up until distance A in the illustration below is

1/16" to 1/8" (1 to 3 mm), and tighten the wing bold in this position.

The clip also allows setting the instrument to "half sustain damper" (slight continuous

damper effect) or "open damper"* by changing its position accordingly.

To set to "open damper" depress the damper pedal fully to keep the damper open,

and set the wire clip to the highest position to lock the damper.

10-3 Damper Spring Adjustment

The damper effect (its pressing force on the tone bars) and the pedal force can be

increased by turning the spring adjustment wheel counterclockwise.

Spring Adjustment

Wheel

Strong

Center Rod Fixing Bolt

Weak

Wire Clip

ASSEMBLY: YV-3910/3710/3700

Pedal

9/16" ~ 13/16"

(1.5 ~ 2 cm)

Floor

Center Rod

Pedal Stroke Adjustment