Yamaha AVANTGRAND N2 소유자 매뉴얼 - 페이지 41

{카테고리_이름} Yamaha AVANTGRAND N2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AVANTGRAND N2 49 페이지. Yamaha electronic keyboard user manual
Yamaha AVANTGRAND N2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (49 페이지)

페이지 인쇄

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance

with the sequence given below.

• Assembly should be carried out by at least three persons.

• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument.

• Be sure to tighten all screws upon completing the assembly of each unit.

• To disassemble, reverse the assembly sequence given below.

Have a Phillips-head (+) screwdriver of the

appropriate size ready.

Remove the parts and collect them

together for assembly.

1-1 Remove the parts shown below from the

smaller box.

Legs

Front (L)

Rear

Front (R)

Screws

x 4

Pedal brace rods

x 2

Cord holders

x 3

1-2 Set the larger box upright with the right side up.

1-3 Cut the bands.

1-4 Remove the covers.

N3: Assembling the Unit

Bolts

x 17

Pedal

AC power cord

Wrench

(Used to tighten bolts)

CAUTION

Do not lay the main unit

upside down on the

ﬂoor.

Attach and securely tighten the right front

leg and the rear leg with the bolts.

x 6

CAUTION

When the instrument is set upright (as in the illustration above),

take extra care not to keep the instrument from falling over, since

it is unstable in this position.

Set a blanket at the left corner.

Incorrect

x 5

N3/N2

•

Owner's Manual