Yamaha AVANTGRAND N2 Instrukcja obsługi - Strona 41
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klawiatura elektroniczna Yamaha AVANTGRAND N2. Yamaha AVANTGRAND N2 49 stron. Yamaha electronic keyboard user manual
Również dla Yamaha AVANTGRAND N2: Instrukcja obsługi (49 strony)
Drukuj stronę
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance
with the sequence given below.
• Assembly should be carried out by at least three persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument.
• Be sure to tighten all screws upon completing the assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
Have a Phillips-head (+) screwdriver of the
appropriate size ready.
1
Remove the parts and collect them
together for assembly.
1-1 Remove the parts shown below from the
smaller box.
Legs
Front (L)
Rear
Front (R)
Screws
x 4
Pedal brace rods
x 2
Cord holders
x 3
1-2 Set the larger box upright with the right side up.
1-3 Cut the bands.
1-4 Remove the covers.
N3: Assembling the Unit
Bolts
x 17
Pedal
AC power cord
Wrench
(Used to tighten bolts)
CAUTION
Do not lay the main unit
upside down on the
floor.
2
Attach and securely tighten the right front
leg and the rear leg with the bolts.
x 6
CAUTION
When the instrument is set upright (as in the illustration above),
take extra care not to keep the instrument from falling over, since
it is unstable in this position.
3
Set a blanket at the left corner.
Incorrect
x 5
41
N3/N2
•
Owner's Manual