Yamaha H01AG 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Yamaha H01AG에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha H01AG 30 페이지. Quick operation guide
Yamaha H01AG에 대해서도 마찬가지입니다: 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

Combining Voices (Dual)

You can play voices simultaneously across the entire range of the keyboard. In this way, you can

combine similar voices to create a thicker sound.

While holding down the [VOICE] button, press two

keys in the range of C1 through A1 simultaneously

(or press one key while holding another) to engage

Dual.

Refer to "Selecting Voices" on page 15 for more information on the voices that

are assigned to the keys.

The voice assigned to the lower key will be designated as Voice 1, and the voice

assigned to the higher key will be designated as Voice 2.

You can make the following settings for Voices 1 and 2 in Dual:

Setting the Octave

You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde-

pendently. Depending on which voices you combine in Dual, the combination

may sound better if one of the voices is shifted up or down an octave.

While holding down the

Voice 1

C#5

Setting the Balance

You can adjust the volume balance between two voices. For example, you can set

one voice as the main voice with a louder setting, and make the other voice softer.

While holding down the

A setting of "0" produces an equal balance between the two Dual voices. Settings

below "0" increase the volume of Voice 2 in relation to Voice 1, and settings above

"0" increase the volume of Voice 1 in relation to Voice 2.

While holding down the [VOICE] button, press one

of the C1–A1 keys (or press the [VOICE] button) to

exit Dual and return to the normal single-voice play.

button, press one of the C5–F5 keys.

[VOICE]

Voice 1 Voice 2

-1

D#5

Voice 2

[VOICE]

button, press one of the F#5–F#6 keys.

F#5 (-6)

-1

F#6 (+6)

C6 (0)

Selecting & Playing Voices

NOTE

Reverb in Dual

The reverb type assigned to

Voice 1 will take priority. If the

reverb assigned to Voice 1 is set

to OFF, the reverb assigned to

Voice 2 will be in effect.

H01 Owner's Manual