Yamaha H01AG 소유자 매뉴얼 - 페이지 19

{카테고리_이름} Yamaha H01AG에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha H01AG 30 페이지. Quick operation guide
Yamaha H01AG에 대해서도 마찬가지입니다: 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

Transposition

The Transpose function makes it possible to shift the pitch of the entire keyboard up or down in

semitone intervals to facilitate playing in difﬁcult key signatures, and to let you easily match the

pitch of the keyboard to the range of a singer or other instruments. For example, if you set the

transposition amount to "+5," playing key C produces pitch F. In this way, you can play a song as

though it were in C major, and the H01 will transpose it to the key of F.

Setting the amount of transposition

While holding down the

keys to set the desired amount of transposition.

To transpose the pitch down (in semitone steps)

While holding down the

F#2 and B2.

To transpose the pitch up (in semitone steps)

While holding down the

C#3 and F#3.

To restore the normal pitch

While holding down the

Fine tuning of the Pitch

You can ﬁne tune the pitch of the entire instrument. This function is useful when you play the

instrument along with other instruments or CD music.

Setting the Pitch

To raise the pitch

in about 1cent steps (100

cents = 1 semitone):

Hold down the A-1 and B-1

keys simultaneously and press

any key between C3 and B3.

To lower the pitch

in about 1cent steps (100

cents = 1 semitone):

Hold down the A-1 and A#-1

keys simultaneously and press

any key between C3 and B3.

To restore standard pitch:

Hold down the A-1, A#-1 and

B-1 simultaneously and press

any key between C3 and B3.

[BGM]

and

[VOICE]

buttons, press one of the F#2–F#3

F#2

-6

-5

and

buttons, press any key between

[BGM]

[VOICE]

and

buttons, press any key between

[BGM]

[VOICE]

and

buttons, press the C3 key.

[BGM]

[VOICE]

A-1 B-1

A#-1

A-1

A#-1

A-1 B-1

F#3

-4

-2

+1 +3

-3

-1

+2 +4 +5

Selecting & Playing Voices

TERMINOLOGY

Transpose:

Changing the key signature. On

the H01, transposing shifts the

pitch of the entire keyboard.

NOTE

Transposition range:

F#2 (-6 semitones)–

C3 (normal pitch)–

F#3 (+6 semitones)

NOTE

Setting range: -65–+65 cents

The default setting (0 cent) is

A3=440Hz. In the 440Hz region,

1Hz=approximately 4 cents.

Pressing the key 8 times for

example, will set A3 at approxi-

mately 442Hz.

TERMINOLOGY

Default setting:

The "Default setting" refers to the

factory setting obtained when you

ﬁrst turn on the power to the

instrument.

H01 Owner's Manual