Yamaha Reface DX 참조 매뉴얼 - 페이지 3

{카테고리_이름} Yamaha Reface DX에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Reface DX 11 페이지.
Yamaha Reface DX에 대해서도 마찬가지입니다: 업데이터 매뉴얼 (8 페이지)

페이지 인쇄
Yamaha Reface DX 참조 매뉴얼

Changing detailed operator settings

Set Operators 1 to 4 as follows.
1.
Press the [EDIT] button to activate Edit mode.
2.
Press one of the [OP1] to [OP4] buttons to select the operator you wish to set.
The setting screen for the corresponding operator is displayed.
3.
If necessary, press the same button several times to select the required page from the setting screen. When a setting
screen contains multiple pages, they are indicated in the form "
4.
Adjust the operator's settings by using the sliders and/or switches.
5.
If necessary, you can also adjust other settings at this time.
For example, if you press the [OP2] button while page 3 from the Operator 1 Settings screen is displayed, page 3 from
the Operator 2 Settings screen is displayed.
Similarly, if you press the [EG level] or [EG rate] button while the Operator 2 Settings screen is displayed, you can make
EG adjustments for Operator 2.
6.
When you have finished making settings, press the [EDIT] button once again to leave Edit mode.
Operator Settings screen (page 1)
1
2
3
1
OP (operator)
2
MODE
3
FREQ (Frequency)
4
DTUNE (Detune)
4
ON or Off
Selects the frequency setting method.
Ratio
Fixed
Specifies the frequency by using a number.
When MODE is set to
"Ratio":
When MODE is set to
"Fixed":
-64 to 0 to +63
" (i.e., page 1 of 3 pages).
Turns the operator on and off.
The frequency is set as a ratio with respect to the standard pitch.
This frequency is also displayed as a ratio when you press the
[FREQ] button.
The frequency is fixed, regardless of which key is played.
This frequency is also displayed in Hertz (Hz) when you press the
[FREQ] button.
Specify a value with respect to the standard
value of 1.00. When this value is doubled,
the octave increases by one; when halved,
0.500 to 31.99
the octave drops by one.
This value is also displayed when you press
the [FREQ] button.
Specifies the frequency in Hertz (Hz).
1.000 to 9,772 Hz
This value is also displayed when you press
the [FREQ] button.
Detunes the frequency set with "FREQ" . Slightly detuning the fre-
quency produces a chorus-like effect.
3
reface Reference Manual