Yamaha Aventage RX-A3040 추가 정보 - 페이지 3

{카테고리_이름} Yamaha Aventage RX-A3040에 대한 추가 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Aventage RX-A3040 8 페이지. About dolby atmos
Yamaha Aventage RX-A3040에 대해서도 마찬가지입니다: 빠른 매뉴얼 (8 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 간편한 설정 매뉴얼 (2 페이지)

페이지 인쇄

1. Connecting Speakers

Additional menu items

The following menu items related to Dolby Atmos feature is newly added.

Page numbers in parentheses denote reference pages in Owner's Manual (the first

number for RX-A3040/RX-A2040 and the second for RX-V3077/RX-V2077).

• Dolby Surround decoder (bSurround) is added and selectable by pressing

SUR.DECODE on the remote control (p.74/74) or in "Decode Type" in the "Sound

Program" menu (p.117/113).

Select the Dolby Surround decoder when playing back Dolby Atmos contents or when

enjoying extended playback by Dolby Surround.

• When "Decoder Type" is set to "bSurround", you can configure the "Center Spread" setting. If you feel the

center sound is too strong when 2-channel source is played with the Dolby Surround decoder, set "Center

Spread" to "On" to spread the center channel signals to left and right.

• "Dolby Enabled SP" is added as a setting of "Layout (Front Presence/Rear Presence)"

in the "Setup" menu (p.126/122).

Select "Dolby Enabled SP" when using Dolby Enabled speakers as the presence

speakers.

Remarks

• When the Dolby Surround decoder is selected, virtual surround processing (such as

Virtual CINEMA FRONT) (p.73), YPAO Volume (p.108) or Compressed Music

Enhancer (p.75) does not work. Also, audio outputs from the HDMI OUT and ZONE

OUT jacks are disabled.

• Dolby Atmos contents will be reproduced in Dolby TrueHD, Dolby Digital Plus or

multi-channel PCM format in the following situations.

– Any sound program or a surround decoder other than the Dolby Surround decoder

is selected.

– Neither surround back nor presence speakers are used.

– Headphones are used (2-channel playback).

• If the Dolby Surround decoder is selected when only one surround back speaker is

used, no sound is output from the surround back speaker (except when a Dolby

Atmos content is played).

Notes on installation of ceiling speakers

When installing presence speakers to a ceiling, use the following illustration as a

reference.

When using two presence speakers

FPR

SBR

SBL

FPL

Installation position

Just above the listening position, or the

ceiling between extensions of front

speakers and listening position

Caution

• Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified

contractor or dealer personnel for installation works.

When using four presence speakers

FPR

RPR

SBR

SBL

FPL

RPL

Installation position

Front presence speakers: the ceiling

between the extensions of the front

speakers and listening position

Rear presence speakers: the ceiling

between the extensions of the listening

position and surround (or surround back)

speakers