Yamaha CRX-N560 펌웨어 업데이트 절차 - 페이지 4

{카테고리_이름} Yamaha CRX-N560에 대한 펌웨어 업데이트 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha CRX-N560 4 페이지.

[ 3. Troubleshooting ]

In case error message appeared during the update and unable to power on, perform

following update procedure.

STEP 1

Copy the update file to a USB thumb drive

Unzip the downloaded file and copy to the root directory of a USB thumb drive.

Be sure to delete all other files in a USB thumb.

STEP 2

Insert the USB thumb drive on the front panel

In this step, AC power cable needs to be disconnected. The disconnection needs to

be kept for several minutes.

STEP 3

Enter firmware update mode

Connect AC power cable to AC outlet, while pressing

"USB UPDATE" will be shown in the front panel display.

Firmware update will be started automatically.

note:

DO NOT

In case the power is accidentally cut off, perform the update procedure from STEP 1

again.

Update is completed when "Update success.", "Please...", "power off!" is

displayed alternately. Then, power off the unit.

STEP 4

Confirm updated firmware version

Power on and press the OPTION button on the remote control and select

"System Config" using the UP/DOWN buttons. Press ENTER and select "Firm

Version" accordingly. Press ENTER again to confirm that the firmware version has

been updated.

Firmware Update Procedure for

CRX-N560/N560D (MCR-N560/MCR-N560D)

interrupt the power or press any buttons during the update.

button.